PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 36516118
36516118 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,BRIDGE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_depth: 0.128 INCHES NOMINAL IN, hole_diameter: 0.219 INCHES NOMINAL IN, overall_width: 0.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-099-7876, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36516118
NSN: 5340-01-099-7876
FSC: 5340
CAGE: 13446 — PERKINS ENGINES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_depth0.128 INCHES NOMINAL IN
hole_diameter0.219 INCHES NOMINAL IN
overall_width0.438 INCHES NOMINAL IN
NSN5340-01-099-7876
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 36516118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
HOLE DEPTH: 0.128 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
HOLE DIAMETER0.219 INCHES NOMINAL IN
HOLE DEPTH0.128 INCHES NOMINAL IN
OVERALL WIDTH0.438 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S: FUEL DISPENSING SYSTEM, TACT AIRFLD (31D) (M1966); AIRCRAFT, HERCULES C-130F; HELICOPTER, MH-53E; HELICOPTER, SEA KNIGHT H-46; TA-4J AIRCRAFT; TRACTOR AIRCRAFT TOWING, MB-4; HELICOPTER, CARRIER BASED ASW, SH-60F; HELICOPTER, ADVANCE ATTACK, AH-1W; HELICOPTER, SEARCH AND RESCUE, HH-60H; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J W
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
397-13Interchangeable
interchangeable cross-reference
interchangeable
16-1537Interchangeable
interchangeable cross-reference
interchangeable
69-1537Interchangeable
interchangeable cross-reference
interchangeable
F635Interchangeable
interchangeable cross-reference
interchangeable
SC628AInterchangeable
interchangeable cross-reference
interchangeable
56628Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36516118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36516118?
36516118 is a CLAMP,BRIDGE.
What parts can replace 36516118?
There are 9 known substitutes for 36516118: 397-13, 16-1537, 69-1537 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36516118?
36516118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-099-7876. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36516118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026