PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 365102
365102 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.185 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, document_type: MFR DRAWING, document_source: 43990, features_provided: HERMETICALLY SEALED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-235-6005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
365102
NSN: 5330-00-235-6005
FSC: 5330
CAGE: 43990 — NORGREN C A CO (USA)
SPECIFICATIONS
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.185 INCHES MAXIMUM IN
body_length0.840 INCHES MAXIMUM IN
document_typeMFR DRAWING
document_source43990
features_providedHERMETICALLY SEALED
output_logic_formEMITTER-COUPLED LOGIC
inclosure_materialCERAMIC
storage_temp_range-55.0 TO 150.0 CELSIUS DEGC
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
bb_end_shank_diameter2.000 INCHES NOMINAL IN
input_circuit_patternDUAL 3 INPUT
NSN5330-00-235-6005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 365102 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOCUMENT IDENTIFICATION: 3651-02
•
DOCUMENT SOURCE: 43990
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
•
DOCUMENT TYPE: MFR DRAWING
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT IDENTIFICATION3651-02
DOCUMENT SOURCE43990
COMPONENT DOCUMENT ORIGININDUSTRIAL
DOCUMENT TYPEMFR DRAWING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
10611/BEJCInterchangeable
interchangeable cross-reference
interchangeable
365102Interchangeable
interchangeable cross-reference
interchangeable
10611BEBJCInterchangeable
interchangeable cross-reference
interchangeable
300062Interchangeable
interchangeable cross-reference
interchangeable
900021Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 365102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 365102?
365102 is a MICROCIRCUIT,DIGITAL.
What parts can replace 365102?
There are 5 known substitutes for 365102: 10611/BEJC, 365102, 10611BEBJC and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 365102?
365102 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-235-6005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 365102

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026