PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 364-1001P2
364-1001P2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.162 INCHES NOMINAL IN, nut_diameter: 0.312 INCHES NOMINAL IN, pilot_length: 0.050 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-514-9371, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
364-1001P2
NSN: 5310-00-514-9371
FSC: 5310
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.162 INCHES NOMINAL IN
nut_diameter0.312 INCHES NOMINAL IN
pilot_length0.050 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.224 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.138 INCHES IN
thread_quantity_per_inch32
NSN5310-00-514-9371
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 364-1001P2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NUT HEIGHT: 0.162 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
NUT HEIGHT0.162 INCHES NOMINAL IN
THREAD QUANTITY PER INCH32
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.138 INCHES IN
THREAD CLASS2B
PILOT LENGTH0.050 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
283162Interchangeable
interchangeable cross-reference
interchangeable
315-14535-01Interchangeable
interchangeable cross-reference
interchangeable
27127Interchangeable
interchangeable cross-reference
interchangeable
364-1001P2REV5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 364-1001P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 364-1001P2?
364-1001P2 is a NUT,PLAIN,CLINCH.
What parts can replace 364-1001P2?
There are 4 known substitutes for 364-1001P2: 283162, 315-14535-01, 27127 and 1 more. Substitute compatibility should be verified for your specific system.
Is 364-1001P2 still available?
364-1001P2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 364-1001P2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026