PartsTable
Technical Data Sheet
Download PDF

364-1001P10 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

364-1001P10: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, nut_style: CLINCH, nut_height: 0.302 INCHES NOMINAL IN, nut_diameter: 0.438 INCHES NOMINAL IN, pilot_length: 0.080 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-601-9666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
364-1001P10
NSN: 5310-00-601-9666
FSC: 5310 — Nuts and Washers
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
nut_styleCLINCH
nut_height0.302 INCHES NOMINAL IN
nut_diameter0.438 INCHES NOMINAL IN
pilot_length0.080 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.364 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch20
NSN5310-00-601-9666
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 364-1001P10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.438 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.364 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.080 INCHES NOMINAL IN
•
NUT HEIGHT: 0.302 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.438 INCHES NOMINAL IN
PILOT DIAMETER0.364 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
PILOT LENGTH0.080 INCHES NOMINAL IN
NUT HEIGHT0.302 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLECLINCH
SUBSTITUTES & CROSS-REFERENCES 1
D3328Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 364-1001P10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 364-1001P10?
364-1001P10 is a NUT,PLAIN,CLINCH.
What parts can replace 364-1001P10?
There is 1 known substitute for 364-1001P10: D3328. Substitute compatibility should be verified for your specific system.
What is the NSN for 364-1001P10?
364-1001P10 is cataloged in the U.S. Government catalog under NSN 5310-00-601-9666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 364-1001P10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.