PartsTable
Technical Data Sheet
PartsTable / O-RING / 364-0537-474
364-0537-474 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, center_hole_diameter: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-804-5695, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
364-0537-474
NSN: 5331-00-804-5695
FSC: 5331 — O-RING
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_hole_diameter0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
end_item_identificationRG-31 MRAP; ARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
NSN5331-00-804-5695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 364-0537-474 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
END ITEM IDENTIFICATIONRG-31 MRAP; ARMORED MULTI-PURPOSE VEHICLE (AMPV); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
FP4BAInterchangeable
interchangeable cross-reference
interchangeable
30108Interchangeable
interchangeable cross-reference
interchangeable
2253-AFInterchangeable
interchangeable cross-reference
interchangeable
2528918Interchangeable
interchangeable cross-reference
interchangeable
MILP5510Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5510Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 364-0537-474?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 364-0537-474?
364-0537-474 is a O-RING.
What parts can replace 364-0537-474?
There are 27 known substitutes for 364-0537-474: FP4BA, 30108, 2253-AF and 24 more. Substitute compatibility should be verified for your specific system.
Is 364-0537-474 still available?
364-0537-474 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 364-0537-474

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026