PartsTable
Technical Data Sheet
PartsTable / MRO / 36324
36324 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ADJUSTING BOLT,VALVE is a the manufacturer industrial component. Key specifications include angle: 60.0 DEGREES NOMINAL, material: STEEL CORROSION RESISTING, head_style: HEXAGON, shaft_type: ROUND SINGLE ACTUATOR, head_height: 0.110 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, shaft_length: 0.654 INCHES NOMINAL SINGLE ACTUATOR IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-2901, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 36324
NSN: 5330-00-353-2901
FSC: 5330
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
angle60.0 DEGREES NOMINAL
materialSTEEL CORROSION RESISTING
head_styleHEXAGON
shaft_typeROUND SINGLE ACTUATOR
head_height0.110 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
shaft_length0.654 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
overall_width0.750 INCHES NOMINAL IN
pole_quantity3 EACH SECTION REAR
terminal_typeTAB, SOLDER LUG
thread_length0.375 INCHES MINIMUM SINGLE MOUNTING FACILITY IN
overall_height0.750 INCHES NOMINAL IN
NSN5330-00-353-2901
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 36324 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
ANGLE: 60.0 DEGREES NOMINAL
•
CROSS SECTION OUTSIDE DIAMETER: 2.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: DELTA
•
CENTER HOLE DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
ANGLE60.0 DEGREES NOMINAL
CROSS SECTION OUTSIDE DIAMETER2.562 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEDELTA
CENTER HOLE DIAMETER2.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
36324Interchangeable
interchangeable cross-reference
interchangeable
8672824Interchangeable
interchangeable cross-reference
interchangeable
MA-12 NSL 2-3-4Interchangeable
interchangeable cross-reference
interchangeable
A-42437 PIECE 11Interchangeable
interchangeable cross-reference
interchangeable
A-49148 PIECE 10Interchangeable
interchangeable cross-reference
interchangeable
SD2794Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36324?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36324?
36324 is a ADJUSTING BOLT,VALVE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 36324?
There are 11 known substitutes for 36324: 36324, 8672824, MA-12 NSL 2-3-4 and 8 more. Substitute compatibility should be verified for your specific system.
Is 36324 still available?
36324 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36324

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026