PartsTable
Technical Data Sheet
Download PDF

363-HA470 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

363-HA470: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: COPPER ALLOY OVERALL, peripheral_diameter: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, body_recess_diameter: 1.090 INCHES MINIMUM AND 1.096 INCHES MAXIMUM IN, center_hole_diameter: 0.700 INCHES MINIMUM AND 0.706 INCHES MAXIMUM IN, cross-sectional_height: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-367-5005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
363-HA470
NSN: 5330-00-367-5005
FSC: 5330 — Packing and Gasket Materials
CAGE: 76364 — MILWAUKEE VALVE CO, INC DIV MILWAUKEE VALVE COMPANY, LLC (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialCOPPER ALLOY OVERALL
peripheral_diameter1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
body_recess_diameter1.090 INCHES MINIMUM AND 1.096 INCHES MAXIMUM IN
center_hole_diameter0.700 INCHES MINIMUM AND 0.706 INCHES MAXIMUM IN
cross-sectional_height0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN
cross-sectional_thickness0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
NSN5330-00-367-5005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 363-HA470 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN
•
BODY RECESS DIAMETER: 1.090 INCHES MINIMUM AND 1.096 INCHES MAXIMUM IN
•
ANGLE: 45.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.700 INCHES MINIMUM AND 0.706 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN
BODY RECESS DIAMETER1.090 INCHES MINIMUM AND 1.096 INCHES MAXIMUM IN
ANGLE45.0 DEGREES NOMINAL
PERIPHERAL DIAMETER1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.700 INCHES MINIMUM AND 0.706 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
363HReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 363-HA470?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 363-HA470?
363-HA470 is a RETAINER,PACKING.
What parts can replace 363-HA470?
There is 1 known substitute for 363-HA470: 363H. Substitute compatibility should be verified for your specific system.
What is the NSN for 363-HA470?
363-HA470 is cataloged in the U.S. Government catalog under NSN 5330-00-367-5005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 363-HA470