PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 362SK12
362SK12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1065 BAND, loop_length: 6.000 INCHES NOMINAL IN, overall_width: 0.250 INCHES NOMINAL IN, special_features: HOLE DIAMETER 1.875 INCHES IN, material_thickness: 0.040 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-361-2881, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
362SK12
NSN: 5340-00-361-2881
FSC: 5340
CAGE: 89619 — MACK TRUCKS, INC. DBA MACUNGIE OPERATIONS DIV LEHIGH VALLEY OPERATIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 1065 BAND
loop_length6.000 INCHES NOMINAL IN
overall_width0.250 INCHES NOMINAL IN
special_featuresHOLE DIAMETER 1.875 INCHES IN
material_thickness0.040 INCHES NOMINAL IN
NSN5340-00-361-2881
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 362SK12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1065 BAND
•
LOOP LENGTH: 6.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1065 BAND
LOOP LENGTH6.000 INCHES NOMINAL IN
SPECIAL FEATURESHOLE DIAMETER 1.875 INCHES IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
60042Upgraded Successor
successor cross-reference
successor
AB-04BInterchangeable
interchangeable cross-reference
interchangeable
50SP4-560Interchangeable
interchangeable cross-reference
interchangeable
5985000216449Interchangeable
interchangeable cross-reference
interchangeable
M13516/6BIInterchangeable
interchangeable cross-reference
interchangeable
PSM30Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 362SK12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 362SK12?
362SK12 is a CLAMP,LOOP.
What parts can replace 362SK12?
There are 24 known substitutes for 362SK12: 60042, AB-04B, 50SP4-560 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 362SK12?
362SK12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-361-2881. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 362SK12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026