PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 362212M1
362212M1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, housing_bore_diameter: 3.623 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-843-7690, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
362212M1
NSN: 5330-00-843-7690
FSC: 5330
CAGE: 55207 — ARROW-MASTER, INCORPORATED (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
housing_bore_diameter3.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-843-7690
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 362212M1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 3.623 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
MATERIAL: STEEL CASE
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER3.623 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
SEAL WIDTH0.438 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
MATERIALSTEEL CASE
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
80201Interchangeable
interchangeable cross-reference
interchangeable
66077-1Interchangeable
interchangeable cross-reference
interchangeable
STD3834-1Interchangeable
interchangeable cross-reference
interchangeable
80201ADXInterchangeable
interchangeable cross-reference
interchangeable
R1160-4Interchangeable
interchangeable cross-reference
interchangeable
45-2900Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 362212M1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 362212M1?
362212M1 is a SEAL,PLAIN ENCASED.
What parts can replace 362212M1?
There are 16 known substitutes for 362212M1: 80201, 66077-1, STD3834-1 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 362212M1?
362212M1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-843-7690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 362212M1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026