PartsTable
Technical Data Sheet
Download PDF

362-542 — SEAL,CONICAL,FLARED TUBE FITTING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

362-542: SEAL,CONICAL,FLARED TUBE FITTING.

SEAL,CONICAL,FLARED TUBE FITTING. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN, thread_length: 0.295 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN, fastener_length: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-041-9624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
362-542
NSN: 5305-01-041-9624
NIINs: 010419624, 013300348
FSC: 5305 — Screws
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
thread_length0.295 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN
fastener_length0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle81.0 DEGREES NOMINAL
surface_treatmentOXIDE OVERALL
width_across_flats0.125 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
NSN5305-01-041-9624
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 362-542 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.295 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: OXIDE OVERALL
•
INTERNAL DRIVE STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.125 INCHES NOMINAL IN
FASTENER LENGTH0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
THREAD LENGTH0.295 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTOXIDE OVERALL
INTERNAL DRIVE STYLEHEXAGON
COUNTERSINK ANGLE81.0 DEGREES NOMINAL
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 362-542?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 362-542?
362-542 is a SEAL,CONICAL,FLARED TUBE FITTING.
What is the NSN for 362-542?
362-542 is cataloged in the U.S. Government catalog under NSN 5305-01-041-9624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 362-542

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.