PartsTable
Technical Data Sheet
PartsTable / MRO / 361644
361644 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 3.360 INCHES MINIMUM AND 3.400 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: BEARING SHAFT, pilot_length: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN, shaft_length: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-6329, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 361644
NSN: 3110-00-112-6329
FSC: 3110
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length3.360 INCHES MINIMUM AND 3.400 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeBEARING SHAFT
pilot_length0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter1.099 INCHES MINIMUM AND 1.109 INCHES MAXIMUM IN
overall_length1.3750 INCHES NOMINAL IN
pilot_diameter0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN
shaft_diameter0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
shaft_end_play0.001 INCHES IN
NSN3110-00-112-6329
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 361644 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.3750 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
SPECIAL FEATURESROLLER TYPE: SOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
J3616Interchangeable
interchangeable cross-reference
interchangeable
16TX794Interchangeable
interchangeable cross-reference
interchangeable
9428562Interchangeable
interchangeable cross-reference
interchangeable
622-3/8Interchangeable
interchangeable cross-reference
interchangeable
4720002541801Interchangeable
interchangeable cross-reference
interchangeable
B107.59Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 361644?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 361644?
361644 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 361644?
There are 28 known substitutes for 361644: J3616, 16TX794, 9428562 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 361644?
361644 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-6329. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 361644

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026