PartsTable
Technical Data Sheet
PartsTable / MRO / 36162
36162 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: RUBBER WHEEL RIM, duty_type: CONTINUOUS, bore_shape: STRAIGHT, wheel_type: BUILT UP, plate_style: RECTANGULAR, tread_width: 1.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-007-6281, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 36162
NSN: 5315-00-007-6281
FSC: 5315
CAGE: 64294 — DANFOSS FLUID POWER INC RACINE OPN (USA)
SPECIFICATIONS
materialRUBBER WHEEL RIM
duty_typeCONTINUOUS
bore_shapeSTRAIGHT
wheel_typeBUILT UP
plate_styleRECTANGULAR
tread_width1.312 INCHES NOMINAL IN
constructionSLOT WOUND
bore_diameter20.00 MILLIMETERS NOMINAL MM
coil_quantity1
overall_width12.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
NSN5315-00-007-6281
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 36162 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 30.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL: STEEL OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.2490 INCHES MINIMUM AND 0.2493 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.359 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE30.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
MATERIALSTEEL OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.2490 INCHES MINIMUM AND 0.2493 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.359 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
40456-43Interchangeable
interchangeable cross-reference
interchangeable
104KSZZB107A006A75C0000-0Interchangeable
interchangeable cross-reference
interchangeable
6004X2RSJMILG327Interchangeable
interchangeable cross-reference
interchangeable
3616-2Interchangeable
interchangeable cross-reference
interchangeable
635-3713Interchangeable
interchangeable cross-reference
interchangeable
648201Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36162?
36162 is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 36162?
There are 12 known substitutes for 36162: 40456-43, 104KSZZB107A006A75C0000-0, 6004X2RSJMILG327 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36162?
36162 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-007-6281. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36162

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026