PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3615ANG25
3615ANG25 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.4375 INCHES NOMINAL IN, outer_ring_width: 0.3125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3615ANG25
NSN: 3110-00-157-0611
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3125 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.4375 INCHES NOMINAL IN
outer_ring_width0.3125 INCHES NOMINAL IN
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter0.8750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-157-0611
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3615ANG25 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OUTER RING WIDTH: 0.3125 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OUTER RING WIDTH0.3125 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
ALIGNMENT TYPERIGID
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
INNER RING WIDTH0.4375 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
KA500PC65Interchangeable
interchangeable cross-reference
interchangeable
SG3245PC29Interchangeable
interchangeable cross-reference
interchangeable
N304-7-12Interchangeable
interchangeable cross-reference
interchangeable
3615Interchangeable
interchangeable cross-reference
interchangeable
9011022Interchangeable
interchangeable cross-reference
interchangeable
XL12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3615ANG25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3615ANG25?
3615ANG25 is a BEARING,ROLLER,NEEDLE.
What parts can replace 3615ANG25?
There are 17 known substitutes for 3615ANG25: KA500PC65, SG3245PC29, N304-7-12 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3615ANG25?
3615ANG25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-0611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3615ANG25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026