361-H — SAW,BAND,CUTOFF

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

361-H: SAW,BAND,CUTOFF.

The SAW,BAND,CUTOFF is a the manufacturer industrial component. Key specifications include phase: THREE, current_type: AC, voltage_rating: 220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM, frequency_rating: 60.0 HERTZ NOMINAL, horsepower_rating: 3.000, cutting_blade_width: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3405-01-271-1415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

361-H

NSN: 3405-01-271-1415
FSC: 3405 — Saws and Filing Machines
CAGE: 7W681 — STARTRITE INC (USA)

SPECIFICATIONS

phase	THREE
current_type	AC
voltage_rating	220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM
frequency_rating	60.0 HERTZ NOMINAL
horsepower_rating	3.000
cutting_blade_width	0.750 INCHES NOMINAL IN
cutting_speed_range	+50.0 TO 5200.0 FEET PER MINUTE FT
cutting_blade_length	180.000 INCHES MINIMUM AND 183.000 INCHES MAXIMUM IN
cut_type_for_which_designed	DRY
NSN	3405-01-271-1415

COMPONENT DIAGRAM

KEY FEATURES

•

CUT TYPE FOR WHICH DESIGNED: DRY

•

PHASE: THREE

•

CURRENT TYPE: AC

•

HORSEPOWER RATING: 3.000

•

CUTTING BLADE WIDTH: 0.750 INCHES NOMINAL IN

•

CUTTING SPEED RANGE: +50.0 TO 5200.0 FEET PER MINUTE FT

•

FREQUENCY RATING: 60.0 HERTZ NOMINAL

TECHNICAL CHARACTERISTICS

CUT TYPE FOR WHICH DESIGNED	DRY
PHASE	THREE
CURRENT TYPE	AC
HORSEPOWER RATING	3.000
CUTTING BLADE WIDTH	0.750 INCHES NOMINAL IN
SPECIAL FEATURES	2 SPEED GEARED TRANSMISSION; MAGNETIC STARTER WITH 110 VOLT CONTROL AND OVERLOAD PROTECTION; SLIDING TABLE 26.0 IN. BY 27.750 IN.; TWO-WAY TABLE TILT 45.0 DEGREES RIGHT,15.0 DEGREES LEFT; 1 FRONT EDGE T-SLOT,4 TABLE TOP T-SLOTS; BUILT-IN HYDRAULIC POWER FEED WITH FAST TRAVERSE AND CUTTING CONTROL; 36 IN. THROAT; 14 IN. WORK HEIGHT UNDER TOP GUIDE; 3 BANDWHEELS 16.0 IN. DIA.,1.750 IN. THICK; BONDED RUBBER WHEEL TIRES; CARBIDE BLADE GUIDES WITH BACKUP ROLLER; 0 TO 35.0 IN. PER MINUTE FEED RATE; 2 GALLON HYDRAULIC TANK CAPACITY; 42 IN. TABLE HEIGHT; BUILT-IN BLADE WELDER,SHEAR,AND FLASH GRINDER FOR 1.0 IN. CAPACITY BLADE; BUILT-IN GROUNDED 110 VOLT RECEPTACLE; BUILT-IN AIR CHIP BLOWER; TABLE TRUNNION AND GUIDE WRENCH; OPERATION AND PARTS MANUAL; OVERALL LENGTH 80.0 IN.; OVERALL WIDTH 43.0 IN.; OVERALL HEIGHT 82.0 IN.; NET WEIGHT 1680 POUNDS; SHIPPING WEIGHT 2030 POUNDS LBS
CUTTING SPEED RANGE	+50.0 TO 5200.0 FEET PER MINUTE FT
FREQUENCY RATING	60.0 HERTZ NOMINAL
CUTTING BLADE LENGTH	180.000 INCHES MINIMUM AND 183.000 INCHES MAXIMUM IN
VOLTAGE RATING	220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM

OTHER ITEMS IN FSC 3405 — Saws and Filing Machines

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3405-00-007-9021 3405-00-051-1652 3405-00-051-1664 3405-00-051-7772 3405-00-051-7831 3405-00-057-9760 3405-00-060-6038 3405-00-069-3769

SUBSTITUTES & CROSS-REFERENCES 1

3405-2253-3613Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 361-H?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 361-H?

361-H is a SAW,BAND,CUTOFF.

What parts can replace 361-H?

There is 1 known substitute for 361-H: 3405-2253-3613. Substitute compatibility should be verified for your specific system.

What is the NSN for 361-H?

361-H is cataloged in the U.S. Government catalog under NSN 3405-01-271-1415. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

361-H — SAW,BAND,CUTOFF

Request a Quote — 361-H