PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 361-0017
361-0017 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.763 INCHES NOMINAL IN, outside_diameter: 1.278 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.188 INCHES NOMINAL IN, end_item_identification: 2320-01-452-5579. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-495-8318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
361-0017
NSN: 5310-01-495-8318
FSC: 5310
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.763 INCHES NOMINAL IN
outside_diameter1.278 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.188 INCHES NOMINAL IN
end_item_identification2320-01-452-5579
NSN5310-01-495-8318
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 361-0017 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL THICKNESS: 0.188 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 1.278 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.763 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL THICKNESS0.188 INCHES NOMINAL IN
END ITEM IDENTIFICATION2320-01-452-5579
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER1.278 INCHES NOMINAL IN
HOLE DIAMETER0.763 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
3611-7Interchangeable
interchangeable cross-reference
interchangeable
GGG-B-191 TY3CL2Interchangeable
interchangeable cross-reference
interchangeable
GGG-B-191Interchangeable
interchangeable cross-reference
interchangeable
MS16560-2Interchangeable
interchangeable cross-reference
interchangeable
575R716H03Interchangeable
interchangeable cross-reference
interchangeable
122 5283Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 361-0017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 361-0017?
361-0017 is a WASHER,LOCK.
What parts can replace 361-0017?
There are 8 known substitutes for 361-0017: 3611-7, GGG-B-191 TY3CL2, GGG-B-191 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 361-0017?
361-0017 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-495-8318. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 361-0017

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026