PartsTable
Technical Data Sheet
Download PDF

3607 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
mophie · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3607: RESISTOR,VARIABLE,NONWIRE WOUND,.

High-performance, heavy-duty PRO cable with a Lightning connector to charge and sync your iPhone, iPad, or iPod. Pro-grade performance mophie PRO USB cables are built using heavy-gauge, high-quality wire to deliver maximum power flow and performance, guaranteeing the fastest connectivity speeds and highest efficiency possible when connecting your Apple devices to any USB charger. Ridiculously rugged and long- lasting Durable braided nylon exterior has a smooth feel matched with unrivaled strength to protect against abrasion and tearing.

Limited lifetime warranty mophie PRO USB cables are built to last, but we will send a replacement if yours ever gets worn out or damaged. Reinforced flexibility Dupont™ Kevlar® armored core adds durability to the cable while maintaining flexibility for use in tight areas and to prevent tangles. Compatibility MFI certified cable made for Apple product This part is cataloged in the U.S.

Government catalog under NSN 5306-00-151-1719, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3607
NSN: 5306-00-151-1719
NIINs: 001511719, 001837334, 001879761, 004230796, 004605508, 004606408, 006467705, 008905907, 008909229, 009063253, 009191337, 010965478, 011088053, 011608816, 012210547, 012517006, 012551776, 013474210, 013816985, 014362547, 015511273
FSC: 5306 — Bolts
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
phaseSINGLE
materialWOOD ENCLOSURE
bore_typeSTRAIGHT
body_shapeROUND
body_styleCYLINDRICAL BUSHING MOUNTED
head_styleHEXAGON
port_styleINVERTED FLARE LOCATION NOT OTHERWISE SPECIFIED
seal_width0.250 INCHES NOMINAL IN
body_length0.750 INCHES MAXIMUM IN
design_typeDRY
grip_length0.922 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
head_height0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
NSN5306-00-151-1719
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3607 · mophie ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
FASTENER LENGTH1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.500 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
AN5-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3607?
3607 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by mophie. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3607?
There is 1 known substitute for 3607: AN5-13. Substitute compatibility should be verified for your specific system.
What is the NSN for 3607?
3607 is cataloged in the U.S. Government catalog under NSN 5306-00-151-1719. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3607

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.