PartsTable
Technical Data Sheet
Download PDF

360445 — 360445

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

360445: 360445.

The 360445 is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: SQUARE, head_height: 0.234 INCHES NOMINAL IN, point_style: FLAT, point_length: 0.250 INCHES NOMINAL IN, thread_class: 2A A. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-206-7386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
360445
NSN: 5305-00-206-7386
NIINs: 002067386, 016188289
FSC: 5305 — Screws
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleSQUARE
head_height0.234 INCHES NOMINAL IN
point_styleFLAT
point_length0.250 INCHES NOMINAL IN
thread_class2A A
thread_length0.875 INCHES MINIMUM IN
fastener_length1.125 INCHES NOMINAL IN
special_featuresCORNERS OF HEAD GROUND TO 0.625 IN. RADIUS IN
thread_directionRIGHT-HAND
point_chamfer_angle120.0 DEGREES NOMINAL
width_between_flats0.312 INCHES NOMINAL IN
NSN5305-00-206-7386
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 360445 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.234 INCHES NOMINAL IN
•
POINT LENGTH: 0.250 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.125 INCHES NOMINAL IN
•
THREAD LENGTH: 0.875 INCHES MINIMUM IN
•
POINT CHAMFER ANGLE: 120.0 DEGREES NOMINAL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: SQUARE
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.234 INCHES NOMINAL IN
POINT LENGTH0.250 INCHES NOMINAL IN
FASTENER LENGTH1.125 INCHES NOMINAL IN
THREAD LENGTH0.875 INCHES MINIMUM IN
POINT CHAMFER ANGLE120.0 DEGREES NOMINAL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLESQUARE
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
WIDTH BETWEEN FLATS0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
28807RReference document
Same NSN cross-reference
Reference document — Secondary reference
080961Reference document
Same NSN cross-reference
Reference document — Secondary reference
C512-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 360445?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 360445?
360445 is a 360445.
What parts can replace 360445?
There are 3 known substitutes for 360445: 28807R, 080961, C512-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 360445?
360445 is cataloged in the U.S. Government catalog under NSN 5305-00-206-7386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 360445

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.