PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3604-27
3604-27 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SCRAPER,PISTON ROD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, hole_diameter: 0.128 INCHES MINIMUM IN, outside_diameter: 0.239 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.031 INCHES NOMINAL IN, end_item_identification: STARTER,ENGINE,GAS TURBINE P/N 383242-1-8,383934-1-2;USAF TYPE STU-20/A34;U/O J79-15 ACFT ENGINE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-841-3424, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3604-27
NSN: 5310-00-841-3424
FSC: 5310
CAGE: 82227 — VDO CONTROL SYSTEMS INC (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
hole_diameter0.128 INCHES MINIMUM IN
outside_diameter0.239 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.031 INCHES NOMINAL IN
end_item_identificationSTARTER,ENGINE,GAS TURBINE P/N 383242-1-8,383934-1-2;USAF TYPE STU-20/A34;U/O J79-15 ACFT ENGINE
NSN5310-00-841-3424
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3604-27 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.239 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL: NICKEL ALLOY OVERALL
•
HOLE DIAMETER: 0.128 INCHES MINIMUM IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.239 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIALNICKEL ALLOY OVERALL
HOLE DIAMETER0.128 INCHES MINIMUM IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
360427Interchangeable
interchangeable cross-reference
interchangeable
5500-15Interchangeable
interchangeable cross-reference
interchangeable
45-88682Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3604-27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3604-27?
3604-27 is a SCRAPER,PISTON ROD.
What parts can replace 3604-27?
There are 3 known substitutes for 3604-27: 360427, 5500-15, 45-88682. Substitute compatibility should be verified for your specific system.
What is the NSN for 3604-27?
3604-27 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-841-3424. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3604-27

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026