PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 36037-3402
36037-3402 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, outside_diameter: 0.198 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.025 INCHES NOMINAL IN, surface_treatment_document_and_classification: MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-109-5483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36037-3402
NSN: 5310-01-109-5483
FSC: 5310
CAGE: 27914 — HONEYWELL INTERNATIONAL INC DBA HONEYWELL (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 303 OR STEEL COMP 303SE OVERALL
hole_diameter0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
outside_diameter0.198 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.025 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-109-5483
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 36037-3402 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OR ASTM A582 ASSN STD 5TH MATERIAL RESPONSE OR ASTM A582 ASSN STD 6TH MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.198 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 303 OR STEEL COMP 303SE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.102 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OR ASTM A582 ASSN STD 5TH MATERIAL RESPONSE OR ASTM A582 ASSN STD 6TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
OUTSIDE DIAMETER0.198 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 303 OR STEEL COMP 303SE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
98203Interchangeable
interchangeable cross-reference
interchangeable
98303Interchangeable
interchangeable cross-reference
interchangeable
10F4406Interchangeable
interchangeable cross-reference
interchangeable
RV4ATFD503CInterchangeable
interchangeable cross-reference
interchangeable
AL98Interchangeable
interchangeable cross-reference
interchangeable
956079Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36037-3402?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36037-3402?
36037-3402 is a WASHER,LOCK.
What parts can replace 36037-3402?
There are 11 known substitutes for 36037-3402: 98203, 98303, 10F4406 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36037-3402?
36037-3402 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-109-5483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36037-3402

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026