PartsTable
Technical Data Sheet
Download PDF

360264 — SPACER,BEARING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

360264: SPACER,BEARING.

The SPACER,BEARING is a the manufacturer industrial component. Key specifications include end_item_identification: STARTER,ENGINE,GAS TURBINE P/N 383242-1-8,383934-1-2;U/O J79-15 ENG. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-005-6024, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
360264
NSN: 5330-00-005-6024
NIINs: 000056024, 008685129
FSC: 5330 — Packing and Gasket Materials
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
end_item_identificationSTARTER,ENGINE,GAS TURBINE P/N 383242-1-8,383934-1-2;U/O J79-15 ENG
general_characteristics_item_descriptionOD 0.890 TO 0.910 IN.;THK 0.088 TO 0.090 IN.;ID 0.411 TO 0.414 IN.;CHAMFER OUTSIDE ONE END 40.0 TO 50.0 DEG,LG 0.040 TO 0.060 IN.;INSIDE CHAMFER 40.0 TO 50.0 DEG,0.050 TO 0.065 IN. LG IN
NSN5330-00-005-6024
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 360264 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: U
•
PERIPHERAL DIAMETER: 3.062 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: LEATHER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEU
PERIPHERAL DIAMETER3.062 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.000 INCHES NOMINAL IN
MATERIALLEATHER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
45-70775Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 360264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 360264?
360264 is a SPACER,BEARING.
What parts can replace 360264?
There is 1 known substitute for 360264: 45-70775. Substitute compatibility should be verified for your specific system.
What is the NSN for 360264?
360264 is cataloged in the U.S. Government catalog under NSN 5330-00-005-6024. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 360264