3602019077 — SPRING,HELICAL,TORSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

3602019077: SPRING,HELICAL,TORSION.

The SPRING,HELICAL,TORSION is a the manufacturer industrial component. Key specifications include end_style: OFFSET HALF LOOP, LEFT END FIRST END, hook_radius: 2.0 MILLIMETERS NOMINAL OVERALL MM, inside_diameter: 15.5 MILLIMETERS NOMINAL MM, special_features: HEAT TREATMENT=STRESS RELIEVE AT 260 DEG. C.

FOR 30 MIN., style_designator: SINGLE TORSION LEFT HAND, surface_treatment: PHOSPHATE MANGANESE OVERALL. This part is cataloged in the U.S. Government catalog under NSN 5360-01-251-9726, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

3602019077

NSN: 5360-01-251-9726
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 3S679 — FN AMERICA LLC DIV COLUMBIA, SC (USA)

SPECIFICATIONS

end_style	OFFSET HALF LOOP, LEFT END FIRST END
hook_radius	2.0 MILLIMETERS NOMINAL OVERALL MM
inside_diameter	15.5 MILLIMETERS NOMINAL MM
special_features	HEAT TREATMENT=STRESS RELIEVE AT 260 DEG. C. FOR 30 MIN.
style_designator	SINGLE TORSION LEFT HAND
surface_treatment	PHOSPHATE MANGANESE OVERALL
spring_free_length	9.5 MILLIMETERS NOMINAL MM
coil_helix_direction	RIGHT-HAND
spring_free_outside_diameter	18.5 MILLIMETERS NOMINAL MM
surface_treatment_document_and_classification	57-02C,TYPE 3,CLASS A,GRADE 1 MFR REF SINGLE TREATMENT RESPONSE OVERALL
end_length_from_first_bend_to_second_bend_or_end	6.3 MILLIMETERS NOMINAL OVERALL MM
end_length_from_second_bend_to_third_bend_or_end	5.0 MILLIMETERS NOMINAL OVERALL MM
NSN	5360-01-251-9726

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 18.5 MILLIMETERS NOMINAL MM

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 57-02C,TYPE 3,CLASS A,GRADE 1 MFR REF SINGLE TREATMENT RESPONSE OVERALL

•

END STYLE: HALF HOOK SECOND END

•

STYLE DESIGNATOR: SINGLE TORSION LEFT HAND

•

SPRING FREE LENGTH: 9.5 MILLIMETERS NOMINAL MM

•

INSIDE DIAMETER: 15.5 MILLIMETERS NOMINAL MM

•

END LENGTH FROM FIRST BEND TO SECOND BEND OR END: 6.3 MILLIMETERS NOMINAL OVERALL MM

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	18.5 MILLIMETERS NOMINAL MM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	57-02C,TYPE 3,CLASS A,GRADE 1 MFR REF SINGLE TREATMENT RESPONSE OVERALL
END STYLE	HALF HOOK SECOND END
END STYLE	OFFSET HALF LOOP, LEFT END FIRST END
STYLE DESIGNATOR	SINGLE TORSION LEFT HAND
SPRING FREE LENGTH	9.5 MILLIMETERS NOMINAL MM
INSIDE DIAMETER	15.5 MILLIMETERS NOMINAL MM
END LENGTH FROM FIRST BEND TO SECOND BEND OR END	6.3 MILLIMETERS NOMINAL OVERALL MM
SPECIAL FEATURES	HEAT TREATMENT=STRESS RELIEVE AT 260 DEG. C. FOR 30 MIN.
SURFACE TREATMENT	PHOSPHATE MANGANESE OVERALL

SUBSTITUTES & CROSS-REFERENCES 1

87XD1029Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 3602019077?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 3602019077?

3602019077 is a SPRING,HELICAL,TORSION.

What parts can replace 3602019077?

There is 1 known substitute for 3602019077: 87XD1029. Substitute compatibility should be verified for your specific system.

What is the NSN for 3602019077?

3602019077 is cataloged in the U.S. Government catalog under NSN 5360-01-251-9726. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

3602019077 — SPRING,HELICAL,TORSION

Request a Quote — 3602019077