PartsTable
Technical Data Sheet
Download PDF

3600-917 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3600-917: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.311 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, thread_length: 1.008 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, fastener_length: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-165-5589, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3600-917
NSN: 5305-01-165-5589
FSC: 5305 — Screws
CAGE: 0ZNQ7 — COPPER STATE BOLT AND NUT CO (USA)
SPECIFICATIONS
head_styleROUND
head_height0.311 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_length1.008 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
fastener_length1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_across_flats0.375 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.625 INCHES IN
thread_quantity_per_inch11
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-165-5589
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3600-917 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.311 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.008 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
HEAD HEIGHT0.311 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN
FASTENER LENGTH1.190 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
THREAD LENGTH1.008 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
THREAD QUANTITY PER INCH11
SUBSTITUTES & CROSS-REFERENCES 2
ASME B18.3-2003Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASME B18.24-2004Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3600-917?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3600-917?
3600-917 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 3600-917?
There are 2 known substitutes for 3600-917: ASME B18.3-2003, ASME B18.24-2004. Substitute compatibility should be verified for your specific system.
What is the NSN for 3600-917?
3600-917 is cataloged in the U.S. Government catalog under NSN 5305-01-165-5589. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3600-917

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.