PartsTable
Technical Data Sheet
Download PDF

3600-805 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3600-805: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL COMP 4140, body_style: CYLINDRICAL BUSHING MOUNTED, head_style: FLAT CHAMFER, body_length: 1.925 INCHES NOMINAL IN, head_height: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN, shaft_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-052-6757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3600-805
NSN: 5305-00-052-6757
NIINs: 000526757, 009260336, 012938796
FSC: 5305 — Screws
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140
body_styleCYLINDRICAL BUSHING MOUNTED
head_styleFLAT CHAMFER
body_length1.925 INCHES NOMINAL IN
head_height0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
shaft_styleROUND
shaft_runout0.001 INCHES IN
thread_class2A STUD THREAD A
actuator_typeSINGLE SHAFT
head_diameter0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL NUT THREAD IN
lateral_runout0.003 INCHES IN
NSN5305-00-052-6757
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3600-805 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.437 INCHES NOMINAL IN
•
THREAD LENGTH: 0.437 INCHES MINIMUM IN
•
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
HEAD HEIGHT0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
FASTENER LENGTH0.437 INCHES NOMINAL IN
THREAD LENGTH0.437 INCHES MINIMUM IN
HARDNESS RATING80.0 ROCKWELL B MINIMUM OVERALL
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 3
33AF1121-02-07Reference document
Same NSN cross-reference
Reference document — Secondary reference
H667160207Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
1446214-15Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 3600-805?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3600-805?
3600-805 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3600-805?
There are 3 known substitutes for 3600-805: 33AF1121-02-07, H667160207, 1446214-15. Substitute compatibility should be verified for your specific system.
What is the NSN for 3600-805?
3600-805 is cataloged in the U.S. Government catalog under NSN 5305-00-052-6757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3600-805