PartsTable
Technical Data Sheet
Download PDF

360-62-550S — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

360-62-550S: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 BAND, overall_width: 0.625 INCHES NOMINAL IN, style_designator: T-BOLT, surface_treatment: PASSIVATE BAND, material_thickness: 0.020 INCHES NOMINAL IN, loop_inside_diameter: 5.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-943-5393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
360-62-550S
NSN: 5340-00-943-5393
FSC: 5340 — Hardware, Commercial
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL COMP 316 BAND
overall_width0.625 INCHES NOMINAL IN
style_designatorT-BOLT
surface_treatmentPASSIVATE BAND
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter5.500 INCHES NOMINAL IN
specification/standard_data26512-GC501AA550 MANUFACTURERS SPECIFICATION
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
NSN5340-00-943-5393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 360-62-550S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 26512-GC501AA550 MANUFACTURERS SPECIFICATION
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL: STEEL COMP 316 BAND
•
LOOP INSIDE DIAMETER: 5.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA26512-GC501AA550 MANUFACTURERS SPECIFICATION
SURFACE TREATMENTPASSIVATE BAND
MATERIALSTEEL COMP 316 BAND
LOOP INSIDE DIAMETER5.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
GC501AA550Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 360-62-550S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 360-62-550S?
360-62-550S is a CLAMP,LOOP.
What parts can replace 360-62-550S?
There is 1 known substitute for 360-62-550S: GC501AA550. Substitute compatibility should be verified for your specific system.
What is the NSN for 360-62-550S?
360-62-550S is cataloged in the U.S. Government catalog under NSN 5340-00-943-5393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 360-62-550S