PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 360-20
360-20 ✓ Verified by PartsTable
InLine · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

Use this fan adapter to install a 200mm fan onto a heat sink which normally can only house a 120mm fan. Using a fan with larger diameter has a positive effect upon noise level, as these fans require far lower rotational speeds for the same air flow volume. Fan adapter made from black plastic and offers excellent price-performance ratio, including several screws and washers.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-032-8391, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
360-20
NSN: 4820-00-032-8391
FSC: 4820
CAGE: 80107 — ACOUSTICAL LABS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
seat_angle37.0 DEGREES FIRST END
point_styleFLAT
thread_class3A FIRST END A
connection_styleFLARED (TUBE) FIRST END
special_features6-32 LOW CARBON ZINC PLATED MACHINE SCREW NUT
style_designatorSTRAIGHT THRU
thread_directionRIGHT-HAND
aperture_diameter0.055 INCHES NOMINAL IN
features_providedSEPARATE CATALYST AND HEAT VULCANIZE FEATURE
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceCONE
NSN4820-00-032-8391
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 360-20 · InLine ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATING PRESSURE: 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.500 INCHES FIRST END IN
•
THREAD QUANTITY PER INCH: 18 FIRST END
•
STYLE DESIGNATOR: STRAIGHT THRU
•
NOMINAL THREAD SIZE: 0.750 INCHES FIRST END IN
•
THREAD SERIES DESIGNATOR: UN FIRST END
•
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID, MINERAL BASE SINGLE RESPONSE
•
MATERIAL: RUBBER SYNTHETIC PACKING
TECHNICAL CHARACTERISTICS (FLIS)
OPERATING PRESSURE1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES FIRST END IN
THREAD QUANTITY PER INCH18 FIRST END
STYLE DESIGNATORSTRAIGHT THRU
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
THREAD SERIES DESIGNATORUN FIRST END
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID, MINERAL BASE SINGLE RESPONSE
MATERIALRUBBER SYNTHETIC PACKING
SEAT ANGLE37.0 DEGREES FIRST END
MATERIALALUMINUM ALLOY BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
NAF212938-1Interchangeable
interchangeable cross-reference
interchangeable
180153G2Interchangeable
interchangeable cross-reference
interchangeable
823193Interchangeable
interchangeable cross-reference
interchangeable
GM43132Interchangeable
interchangeable cross-reference
interchangeable
2325559-0701Interchangeable
interchangeable cross-reference
interchangeable
360-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 360-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 360-20?
360-20 is a VALVE,RESTRICTOR CHECK manufactured by InLine.
What parts can replace 360-20?
There are 12 known substitutes for 360-20: NAF212938-1, 180153G2, 823193 and 9 more. Substitute compatibility should be verified for your specific system.
Is 360-20 still available?
360-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 360-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026