PartsTable
Technical Data Sheet
Download PDF

360-088A9-002 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

360-088A9-002: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, first_leg_length: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-332-7382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
360-088A9-002
NSN: 5340-01-332-7382
FSC: 5340 — Hardware, Commercial
CAGE: 15725 — RSI WIRELESS COMMUNICATIONS DBA CSA WIRELESS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
first_leg_length0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
second_leg_styleSQUARE
second_leg_width1.420 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.802 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
mounting_hole_typePLAIN
first_leg_thickness0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
second_leg_thickness0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
NSN5340-01-332-7382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 360-088A9-002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.253 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.225 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 1.420 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.802 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.253 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.225 INCHES MINIMUM AND 0.231 INCHES MAXIMUM IN
SECOND LEG WIDTH1.420 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SECOND LEG LENGTH1.802 INCHES MINIMUM AND 1.812 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 360-088A9-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 360-088A9-002?
360-088A9-002 is a BRACKET,ANGLE.
What is the NSN for 360-088A9-002?
360-088A9-002 is cataloged in the U.S. Government catalog under NSN 5340-01-332-7382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 360-088A9-002

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.