PartsTable
Technical Data Sheet
PartsTable / MRO / 36-501
36-501 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions. Ideal for safety-critical installations, this cable is perfectly suited for public environments such as schools, transport hubs, and government buildings, anywhere safety compliance and performance are essential.<br><br>The cable features a double shielded construction with 30AWG bare copper for premium performance featuring gold connectors and gold flashed contacts to maintain signal integrity and reliability. <br><br>Supporting 18Gbps bandwidth the Lindy LSZH HDMI® Cable can support UHD resolutions up to 3840x2160@60Hz 4:4:4 8bit.

Whilst also transmitting up to 32 Channel audio including Dolby® True HD & DTS-HD Master Audio. <br><br>The Lindy LSZH HDMI® Cable is available in lengths from 0.5m to 10m. <br><br>The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are tradem This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-272-5781, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 36-501
NSN: 5310-00-272-5781
FSC: 5310
CAGE: 19315 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS (USA)
SPECIFICATIONS
materialPLASTIC HUB
nut_styleHEXAGON
body_styleSTRAIGHT SHAPE, EXTERNAL COUPLING
nut_height0.188 INCHES NOMINAL IN
shell_typeSOLID
slot_depth0.093 INCHES SINGLE END IN
slot_width0.029 INCHES SINGLE END IN
tooth_formSTANDARD
swage_depth0.045 INCHES IN
thread_class2A A
largest_width0.094 INCHES SINGLE END IN
terminal_typeCRIMP SINGLE MATING END SINGLE CONTACT GROUPING
NSN5310-00-272-5781
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 36-501 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NUT HEIGHT: 0.188 INCHES NOMINAL IN
•
BEARING SURFACE TYPE: WASHER FACED
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
THREAD SERIES: UNF
•
THREAD QUANTITY PER INCH: 24
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1212 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.188 INCHES NOMINAL IN
BEARING SURFACE TYPEWASHER FACED
NOMINAL THREAD SIZE0.312 INCHES IN
THREAD SERIESUNF
THREAD QUANTITY PER INCH24
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1212 OVERALL
NUT STYLEHEXAGON
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
36501Interchangeable
interchangeable cross-reference
interchangeable
098095Interchangeable
interchangeable cross-reference
interchangeable
M1318Interchangeable
interchangeable cross-reference
interchangeable
227MR141P002Interchangeable
interchangeable cross-reference
interchangeable
5261-5Interchangeable
interchangeable cross-reference
interchangeable
745524-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36-501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36-501?
36-501 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 36-501?
There are 15 known substitutes for 36-501: 36501, 098095, M1318 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36-501?
36-501 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-272-5781. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36-501

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026