PartsTable
Technical Data Sheet
36-3838-2 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ANGLE,ACTUATOR,ELEC is a the manufacturer industrial component. Key specifications include case_style: RECESSED, seal_width: 0.240 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.311 INCHES MINIMUM AND 1.313 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-238-8457, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36-3838-2
NSN: 5330-00-238-8457
FSC: 5330
CAGE: 59364 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - TEMPE (WEST WARNER ROAD) (USA)
SPECIFICATIONS
case_styleRECESSED
seal_width0.240 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
sealing_element_styleANGULAR
accommodated_shaft_diameter1.311 INCHES MINIMUM AND 1.313 INCHES MAXIMUM IN
NSN5330-00-238-8457
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 36-3838-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SEAL WIDTH: 0.240 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 1.311 INCHES MINIMUM AND 1.313 INCHES MAXIMUM IN
TEMP RATING: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CASE STYLE: RECESSED
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.240 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER1.311 INCHES MINIMUM AND 1.313 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CASE STYLERECESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1669893Interchangeable
interchangeable cross-reference
interchangeable
95807R1Interchangeable
interchangeable cross-reference
interchangeable
116-14Interchangeable
interchangeable cross-reference
interchangeable
36-3838-2Interchangeable
interchangeable cross-reference
interchangeable
363717-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36-3838-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36-3838-2?
36-3838-2 is a ANGLE,ACTUATOR,ELEC.
What parts can replace 36-3838-2?
There are 5 known substitutes for 36-3838-2: 1669893, 95807R1, 116-14 and 2 more. Substitute compatibility should be verified for your specific system.
Is 36-3838-2 still available?
36-3838-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36-3838-2