PartsTable
Technical Data Sheet
PartsTable / MRO / 36-10
36-10 ✓ Verified by PartsTable
Contour Design · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The Contour Headband Mount is that true multi-sport mount you've been looking for. The elastic headband is easy to adjust via sliding buckle, and the TRail™ system allows you to quickly attach your Contour camera. The mount is firm, providing jiggle-free recording for all of your helmetless activities.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-827-7034, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 36-10
NSN: 5998-00-827-7034
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 02227 — NAVAL ELECTRONIC SYSTEMS SECURITY ENGINEERING CENTER (USA)
SPECIFICATIONS
coverNOT PROVIDED
phaseSINGLE
shapeRIGHT ANGLE
width10.000 INCHES NOMINAL IN
handleFURNISHED
length12.000 INCHES NOMINAL IN
capacity6.0 BUSHELS
materialPLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) HEADBAND
end_styleSHORT TWISTED HOOK BOTH ENDS
tire_typeMETAL
body_styleCYLINDRICAL BUSHING MOUNTED
body_width13.450 INCHES MAXIMUM IN
NSN5998-00-827-7034
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 36-10 MFR Contour Design RESISTOR,VARIABLE,NONWIRE WOUND,
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH6.486 INCHES NOMINAL IN
OVERALL WIDTH4.437 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITORS,FIXED,MICA 12; PRINTED WIRING BOARD 1; RESISTORS,FIXED,COMPOSITION 36; RIVETS 3; SEMICONDUCTOR DEVICES,DIODE 12; TRANSISTORS 12; TRANSISTOR MOUNTINGS 12
OVERALL HEIGHT0.718 INCHES NOMINAL IN
OVERALL LENGTH6.486 INCHES NOMINAL IN
OVERALL WIDTH4.437 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITORS,FIXED,MICA 12; PRINTED WIRING BOARD 1; RESISTORS,FIXED,COMPOSITION 36; RIVETS 3; SEMICONDUCTOR DEVICES,DIODE 12; TRANSISTORS 12; TRANSISTOR MOUNTINGS 12
OVERALL HEIGHT0.718 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
819-658Interchangeable
interchangeable cross-reference
interchangeable
143Interchangeable
interchangeable cross-reference
interchangeable
BA503Interchangeable
interchangeable cross-reference
interchangeable
3610Interchangeable
interchangeable cross-reference
interchangeable
5L610Interchangeable
interchangeable cross-reference
interchangeable
GA2L040S104UCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 36-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36-10?
36-10 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Contour Design. It is classified as a MRO (MRO_GENERAL).
What parts can replace 36-10?
There are 18 known substitutes for 36-10: 819-658, 143, BA503 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36-10?
36-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-827-7034. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026