PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 36-1-4SS
36-1-4SS ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, outside_diameter: 0.493 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.062 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36-1-4SS
NSN: 5310-00-209-0955
FSC: 5310
CAGE: 82974 — MUNTERS CORPORATION DBA MUNTERS DES CHAMPS PRODUCTS DIV CARGOCAIRE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
outside_diameter0.493 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.062 INCHES MINIMUM IN
NSN5310-00-209-0955
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 36-1-4SS · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.493 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL THICKNESS: 0.062 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.493 INCHES MAXIMUM IN
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL THICKNESS0.062 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
CMF-55-116G4990FInterchangeable
interchangeable cross-reference
interchangeable
0698-5852Interchangeable
interchangeable cross-reference
interchangeable
2089424-0708Interchangeable
interchangeable cross-reference
interchangeable
15520Interchangeable
interchangeable cross-reference
interchangeable
107268Interchangeable
interchangeable cross-reference
interchangeable
AN935C416Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36-1-4SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36-1-4SS?
36-1-4SS is a WASHER,LOCK.
What parts can replace 36-1-4SS?
There are 7 known substitutes for 36-1-4SS: CMF-55-116G4990F, 0698-5852, 2089424-0708 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 36-1-4SS?
36-1-4SS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-0955. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36-1-4SS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026