36-05-7816 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

36-05-7816: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.500 INCHES NOMINAL IN, first_hole_diameter: 0.141 INCHES NOMINAL IN, pin_overall_diameter: 0.9960 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-066-5575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

36-05-7816

NSN: 5315-01-066-5575
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)

SPECIFICATIONS

material	NICKEL ALLOY 400 OVERALL
first_end_style	CHAMFERED
pin_overall_length	2.500 INCHES NOMINAL IN
first_hole_diameter	0.141 INCHES NOMINAL IN
pin_overall_diameter	0.9960 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
first_end_taper_angle	45.0 DEGREES NOMINAL
first_end_taper_length	0.030 INCHES NOMINAL IN
hole_arrangement_style	ONE END DRILLED
material_document_and_classification	QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_end	IDENTICAL
distance_from_centerline_of_hole_to_end_of_pin	0.410 INCHES NOMINAL IN
NSN	5315-01-066-5575

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

FIRST END STYLE: CHAMFERED

•

FIRST HOLE DIAMETER: 0.141 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL

•

PIN OVERALL DIAMETER: 0.9960 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN

•

PIN OVERALL LENGTH: 2.500 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

FIRST END TAPER LENGTH	0.030 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
FIRST END STYLE	CHAMFERED
FIRST HOLE DIAMETER	0.141 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER	0.9960 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
PIN OVERALL LENGTH	2.500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
MATERIAL	NICKEL ALLOY 400 OVERALL

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 2

4676624-0008Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

87577-3304ITEM8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 36-05-7816?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 36-05-7816?

36-05-7816 is a PIN,STRAIGHT,HEADLESS.

What parts can replace 36-05-7816?

There are 2 known substitutes for 36-05-7816: 4676624-0008, 87577-3304ITEM8. Substitute compatibility should be verified for your specific system.

What is the NSN for 36-05-7816?

36-05-7816 is cataloged in the U.S. Government catalog under NSN 5315-01-066-5575. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

36-05-7816 — PIN,STRAIGHT,HEADLESS

Request a Quote — 36-05-7816