PartsTable
Technical Data Sheet
Download PDF

35P118 — PIN,STRAIGHT,THREADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

35P118: PIN,STRAIGHT,THREADED.

The PIN,STRAIGHT,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4063H OVERALL, thread_class: 3A A, thread_length: 0.688 INCHES NOMINAL IN, first_end_style: SQUARE, hardness_rating: 31.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL, pin_grip_length: 5.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-358-9559, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35P118
NSN: 5315-00-358-9559
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 81240 — WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4063H OVERALL
thread_class3A A
thread_length0.688 INCHES NOMINAL IN
first_end_styleSQUARE
hardness_rating31.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
pin_grip_length5.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
first_end_locationBOTH ENDS
pin_overall_length6.375 INCHES NOMINAL IN
first_hole_diameter0.156 INCHES NOMINAL IN
nominal_thread_size1.000 INCHES IN
pin_overall_diameter1.2493 INCHES MINIMUM AND 1.2498 INCHES MAXIMUM IN
NSN5315-00-358-9559
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 35P118 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
THREAD LENGTH: 0.688 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
FIRST HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
HARDNESS RATING: 31.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
•
PIN OVERALL DIAMETER: 1.2493 INCHES MINIMUM AND 1.2498 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 6.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST END LOCATIONBOTH ENDS
HOLE ARRANGEMENT STYLEONE END DRILLED
THREAD LENGTH0.688 INCHES NOMINAL IN
FIRST END STYLESQUARE
FIRST HOLE DIAMETER0.156 INCHES NOMINAL IN
HARDNESS RATING31.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
PIN OVERALL DIAMETER1.2493 INCHES MINIMUM AND 1.2498 INCHES MAXIMUM IN
PIN OVERALL LENGTH6.375 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 1
104232Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 35P118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35P118?
35P118 is a PIN,STRAIGHT,THREADED.
What parts can replace 35P118?
There is 1 known substitute for 35P118: 104232. Substitute compatibility should be verified for your specific system.
What is the NSN for 35P118?
35P118 is cataloged in the U.S. Government catalog under NSN 5315-00-358-9559. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35P118

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.