Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.188 INCHES NOMINAL IN, aperture_width: 5.062 INCHES NOMINAL IN, overall_length: 6.375 INCHES NOMINAL IN, aperture_length: 5.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-350-2948, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
35P1
NSN:5330-00-350-2948 FSC:5330 CAGE:56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
material
PAPER AND GLUE OVERALL
hole_diameter
0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
6.188 INCHES NOMINAL IN
aperture_width
5.062 INCHES NOMINAL IN
overall_length
6.375 INCHES NOMINAL IN
aperture_length
5.125 INCHES NOMINAL IN
style_designator
NON-CIRCULAR
bolt_hole_quantity
4
outside_corner_radius
0.438 INCHES NOMINAL IN
cross-sectional_thickness
0.031 INCHES NOMINAL IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
inside_corner_inverted_radius
0.375 INCHES NOMINAL IN
NSN
5330-00-350-2948
COMPONENT DIAGRAM
KEY FEATURES
•
INSIDE CORNER INVERTED RADIUS: 0.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
OUTSIDE CORNER RADIUS: 0.438 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
APERTURE WIDTH: 5.062 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE CORNER INVERTED RADIUS
0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
4.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
1.000 INCHES NOMINAL IN
STYLE DESIGNATOR
NON-CIRCULAR
OUTSIDE CORNER RADIUS
0.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
APERTURE WIDTH
5.062 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35P1?
35P1 is a GASKET.
What parts can replace 35P1?
There are 7 known substitutes for 35P1: ME39632, 42X5, 841064 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35P1?
35P1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-350-2948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.