PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35BC33XHH30M
35BC33XHH30M ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 1.3750 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-231-9922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35BC33XHH30M
NSN: 3110-00-231-9922
FSC: 3110
CAGE: 70413 — ANTI-FRICTION BEARING MFG ASSN INC THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width1.3750 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresCARTRIDGE TYPE BEARING WITHOUT GREASE PLUG
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeLABYRINTH
lubrication_materialGREASE
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
NSN3110-00-231-9922
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 35BC33XHH30M · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
SEAL QUANTITY: 2
•
BEARING SEAL TYPE: LABYRINTH
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.3750 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONLOOSE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
SEAL QUANTITY2
BEARING SEAL TYPELABYRINTH
LUBRICATION MATERIALGREASE
SPECIAL FEATURESCARTRIDGE TYPE BEARING WITHOUT GREASE PLUG
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
405850-53LInterchangeable
interchangeable cross-reference
interchangeable
3110PL0798150Interchangeable
interchangeable cross-reference
interchangeable
25BC33XX3MInterchangeable
interchangeable cross-reference
interchangeable
405850-76BInterchangeable
interchangeable cross-reference
interchangeable
405850-53MInterchangeable
interchangeable cross-reference
interchangeable
30BC33XSS3MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35BC33XHH30M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35BC33XHH30M?
35BC33XHH30M is a BEARING,BALL,ANNULAR.
What parts can replace 35BC33XHH30M?
There are 33 known substitutes for 35BC33XHH30M: 405850-53L, 3110PL0798150, 25BC33XX3M and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35BC33XHH30M?
35BC33XHH30M is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-231-9922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35BC33XHH30M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026