PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35A652
35A652 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 2.535 INCHES NOMINAL IN, height: 1.750 INCHES NOMINAL IN, length: 2.438 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.688 INCHES NOMINAL IN, furnished_items: LOCKNUT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-359-1077, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35A652
NSN: 5340-00-359-1077
FSC: 5340
CAGE: 81249 — LIBRARY EFFICIENCY CORP (USA)
SPECIFICATIONS
width2.535 INCHES NOMINAL IN
height1.750 INCHES NOMINAL IN
length2.438 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.688 INCHES NOMINAL IN
furnished_itemsLOCKNUT
special_featuresMTG HOLE ELONGATED TO 1.125 IN. LG IN
surface_treatmentPAINT
NSN5340-00-359-1077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35A652 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.438 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT
•
HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
HEIGHT: 1.750 INCHES NOMINAL IN
•
WIDTH: 2.535 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH2.438 INCHES NOMINAL IN
SURFACE TREATMENTPAINT
HOLE DIAMETER0.688 INCHES NOMINAL IN
MATERIALSTEEL
HEIGHT1.750 INCHES NOMINAL IN
WIDTH2.535 INCHES NOMINAL IN
SPECIAL FEATURESMTG HOLE ELONGATED TO 1.125 IN. LG IN
FURNISHED ITEMSLOCKNUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
769Interchangeable
interchangeable cross-reference
interchangeable
LTCT21898-07Interchangeable
interchangeable cross-reference
interchangeable
GL12-1Interchangeable
interchangeable cross-reference
interchangeable
5021-0375Interchangeable
interchangeable cross-reference
interchangeable
51-10046Interchangeable
interchangeable cross-reference
interchangeable
43211Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35A652?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35A652?
35A652 is a CLAMP,SYNCHRO.
What parts can replace 35A652?
There are 18 known substitutes for 35A652: 769, LTCT21898-07, GL12-1 and 15 more. Substitute compatibility should be verified for your specific system.
Is 35A652 still available?
35A652 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35A652

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026