PartsTable
Technical Data Sheet
Download PDF

359719 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

359719: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8735 OVERALL, nut_style: HEXAGON, nut_height: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-062-4742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
359719
NSN: 5310-00-062-4742
FSC: 5310 — Nuts and Washers
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 8735 OVERALL
nut_styleHEXAGON
nut_height0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.055 INCHES NOMINAL IN
hole_type_and_quantity2 DRILLED
NSN5310-00-062-4742
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 359719 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
DRILLED HOLE DIAMETER: 0.055 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6320 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER0.055 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 2
561577Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
178938Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 359719?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 359719?
359719 is a NUT,PLAIN,HEXAGON.
What parts can replace 359719?
There are 2 known substitutes for 359719: 561577, 178938. Substitute compatibility should be verified for your specific system.
What is the NSN for 359719?
359719 is cataloged in the U.S. Government catalog under NSN 5310-00-062-4742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 359719

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.