PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3594157
3594157 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 4.760 INCHES NOMINAL IN, outside_diameter: 5.250 INCHES NOMINAL IN, material_thickness: 0.470 INCHES NOMINAL IN, outer_edge_thickness: 0.308 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-359-4157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3594157
NSN: 5330-00-359-4157
FSC: 5330
CAGE: 20149 — INTRUPA MFG CO (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter4.760 INCHES NOMINAL IN
outside_diameter5.250 INCHES NOMINAL IN
material_thickness0.470 INCHES NOMINAL IN
outer_edge_thickness0.308 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
NSN5330-00-359-4157
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3594157 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 5.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
•
INSIDE DIAMETER: 4.760 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
•
OUTER EDGE THICKNESS: 0.308 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.470 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER5.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED AND BEVELED, STRAIGHT FACE
INSIDE DIAMETER4.760 INCHES NOMINAL IN
RING STYLECONCENTRIC
OUTER EDGE THICKNESS0.308 INCHES NOMINAL IN
MATERIAL THICKNESS0.470 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
384970PHInterchangeable
interchangeable cross-reference
interchangeable
384970-00Interchangeable
interchangeable cross-reference
interchangeable
SK-184970Interchangeable
interchangeable cross-reference
interchangeable
SM-B-95542Interchangeable
interchangeable cross-reference
interchangeable
10293Interchangeable
interchangeable cross-reference
interchangeable
10293-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3594157?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3594157?
3594157 is a RING,WIPER.
What parts can replace 3594157?
There are 14 known substitutes for 3594157: 384970PH, 384970-00, SK-184970 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3594157?
3594157 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-359-4157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3594157

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026