PartsTable
Technical Data Sheet
Download PDF

3591519956 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3591519956: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 9.00 MILLIMETERS MINIMUM AND 9.50 MILLIMETERS MAXIMUM MM, material: STEEL COMP 1008 OR STEEL COMP 1010 OVERALL, overall_width: 17.0 MILLIMETERS NOMINAL MM, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PLASTIC EPOXY FORMALDEHYDE OVERALL, material_thickness: 0.97 MILLIMETERS MINIMUM AND 1.02 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-151-9956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3591519956
NSN: 5340-01-151-9956
FSC: 5340 — Hardware, Commercial
CAGE: 00GPU — BM GROUP LTD (BGR)
SPECIFICATIONS
diameter9.00 MILLIMETERS MINIMUM AND 9.50 MILLIMETERS MAXIMUM MM
materialSTEEL COMP 1008 OR STEEL COMP 1010 OVERALL
overall_width17.0 MILLIMETERS NOMINAL MM
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPLASTIC EPOXY FORMALDEHYDE OVERALL
material_thickness0.97 MILLIMETERS MINIMUM AND 1.02 MILLIMETERS MAXIMUM MM
loop_inside_diameter4.35 MILLIMETERS MINIMUM AND 4.85 MILLIMETERS MAXIMUM MM
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
distance_from_loop_center_to_tongue_end51.0 MILLIMETERS NOMINAL MM
surface_treatment_document_and_classificationGM 6174-M CODE A GENERAL MOTORS CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
distance_from_loop_center_to_base_of_offset_tongue9.5 MILLIMETERS NOMINAL MM
center_to_center_distance_between_loop_and_mounting_hole42.5 MILLIMETERS NOMINAL MM
NSN5340-01-151-9956
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3591519956 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: GM 6174-M CODE A GENERAL MOTORS CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE FROM LOOP CENTER TO BASE OF OFFSET TONGUE: 9.5 MILLIMETERS NOMINAL MM
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
DIAMETER: 9.00 MILLIMETERS MINIMUM AND 9.50 MILLIMETERS MAXIMUM MM
•
MATERIAL THICKNESS: 0.97 MILLIMETERS MINIMUM AND 1.02 MILLIMETERS MAXIMUM MM
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 51.0 MILLIMETERS NOMINAL MM
•
SURFACE TREATMENT: PLASTIC EPOXY FORMALDEHYDE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONGM 6174-M CODE A GENERAL MOTORS CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL
DISTANCE FROM LOOP CENTER TO BASE OF OFFSET TONGUE9.5 MILLIMETERS NOMINAL MM
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
DIAMETER9.00 MILLIMETERS MINIMUM AND 9.50 MILLIMETERS MAXIMUM MM
OVERALL WIDTH17.0 MILLIMETERS NOMINAL MM
MATERIAL THICKNESS0.97 MILLIMETERS MINIMUM AND 1.02 MILLIMETERS MAXIMUM MM
DISTANCE FROM LOOP CENTER TO TONGUE END51.0 MILLIMETERS NOMINAL MM
SURFACE TREATMENTPLASTIC EPOXY FORMALDEHYDE OVERALL
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE42.5 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
14033893Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340PL1970393Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 3591519956?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3591519956?
3591519956 is a CLAMP,LOOP.
What parts can replace 3591519956?
There are 2 known substitutes for 3591519956: 14033893, 5340PL1970393. Substitute compatibility should be verified for your specific system.
What is the NSN for 3591519956?
3591519956 is cataloged in the U.S. Government catalog under NSN 5340-01-151-9956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3591519956

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.