PartsTable
Technical Data Sheet
Download PDF

35915-68 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

35915-68: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OVERALL, head_style: FLAT CHAMFER, head_height: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, thread_length: 0.380 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-966-7917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35915-68
NSN: 5305-00-966-7917
FSC: 5305 — Screws
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OVERALL
head_styleFLAT CHAMFER
head_height0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length0.380 INCHES MAXIMUM IN
fastener_length1.380 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.094 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-966-7917
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 35915-68 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.094 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.380 INCHES NOMINAL IN
•
THREAD LENGTH: 0.380 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.094 INCHES NOMINAL IN
HEAD HEIGHT0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
FASTENER LENGTH1.380 INCHES NOMINAL IN
THREAD LENGTH0.380 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 2
FF-S-86TYIV4-40UNC-3AX1.380X0.38Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FF-S-86 TY IVReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 35915-68?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35915-68?
35915-68 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 35915-68?
There are 2 known substitutes for 35915-68: FF-S-86TYIV4-40UNC-3AX1.380X0.38, FF-S-86 TY IV. Substitute compatibility should be verified for your specific system.
What is the NSN for 35915-68?
35915-68 is cataloged in the U.S. Government catalog under NSN 5305-00-966-7917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35915-68

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.