PartsTable
Technical Data Sheet
Download PDF

35901 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

35901: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 1.000 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-255-0542, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35901
NSN: 5330-00-255-0542
NIINs: 002550542, 013828795, 013828870
FSC: 5330 — Packing and Gasket Materials
CAGE: 79150 — DANA AUTOMOTIVE SYSTEMS GROUP, LLC DBA DANA SEALING PRODUCTS (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter1.000 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.500 INCHES NOMINAL IN
special_featuresINNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC
thread_directionRIGHT-HAND FIRST END
operating_pressure4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.312 INCHES FIRST END IN
NSN5330-00-255-0542
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35901 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 1.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 F33749-3 MIL SPEC 7TH MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.797 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER1.375 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 F33749-3 MIL SPEC 7TH MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.750 INCHES NOMINAL IN
APERTURE DIAMETER1.797 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER2.875 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
66258Reference document
Same NSN cross-reference
Reference document — Secondary reference
00737Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 35901?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35901?
35901 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 35901?
There are 2 known substitutes for 35901: 66258, 00737. Substitute compatibility should be verified for your specific system.
What is the NSN for 35901?
35901 is cataloged in the U.S. Government catalog under NSN 5330-00-255-0542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35901