PartsTable
Technical Data Sheet
Download PDF

358693 — SPACER,PLATE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

358693: SPACER,PLATE.

The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, seal_width: 13.72 MILLIMETERS MINIMUM AND 14.22 MILLIMETERS MAXIMUM MM, slot_width: 0.220 INCHES NOMINAL IN, construction: ONE-PIECE, overall_width: 0.620 INCHES NOMINAL IN, overall_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-319-4856, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
358693
NSN: 5330-01-319-4856
NIINs: 013194856, 013419485
FSC: 5330 — Packing and Gasket Materials
CAGE: 97947 — LISTER PETTER AMERICAS INCORPORATED (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
seal_width13.72 MILLIMETERS MINIMUM AND 14.22 MILLIMETERS MAXIMUM MM
slot_width0.220 INCHES NOMINAL IN
constructionONE-PIECE
overall_width0.620 INCHES NOMINAL IN
slot_quantity1
overall_length0.750 INCHES NOMINAL IN
surface_treatmentCHROMATE
housing_bore_diameter10.88 MILLIMETERS MINIMUM AND 11.38 MILLIMETERS MAXIMUM MM
material_document_and_classificationA+7025,CAGEC 97947 MFR REF SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE
NSN5330-01-319-4856
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 358693 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 13.72 MILLIMETERS MINIMUM AND 14.22 MILLIMETERS MAXIMUM MM
•
HOUSING BORE DIAMETER: 10.88 MILLIMETERS MINIMUM AND 11.38 MILLIMETERS MAXIMUM MM
•
MATERIAL DOCUMENT AND CLASSIFICATION: A+7025,CAGEC 97947 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS
SEAL WIDTH13.72 MILLIMETERS MINIMUM AND 14.22 MILLIMETERS MAXIMUM MM
HOUSING BORE DIAMETER10.88 MILLIMETERS MINIMUM AND 11.38 MILLIMETERS MAXIMUM MM
MATERIAL DOCUMENT AND CLASSIFICATIONA+7025,CAGEC 97947 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
CONSTRUCTIONONE-PIECE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 358693?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 358693?
358693 is a SPACER,PLATE.
What is the NSN for 358693?
358693 is cataloged in the U.S. Government catalog under NSN 5330-01-319-4856. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 358693

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.