PartsTable
Technical Data Sheet
Download PDF

3585A — BEARING,BALL,LINEAR MOTION

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3585A: BEARING,BALL,LINEAR MOTION.

The BEARING,BALL,LINEAR MOTION is a the manufacturer industrial component. Key specifications include phase: SINGLE, unit_type: PLUG-IN, overall_depth: 25.000 INCHES NOMINAL IN, overall_width: 16.750 INCHES NOMINAL IN, overall_height: 9.000 INCHES NOMINAL IN, frequency_rating: 48.0 HERTZ MINIMUM AND 440.0 HERTZ MAXIMUM OR 48.0 HERTZ MINIMUM AND 66.0 HERTZ MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-229-9299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3585A
NSN: 5340-00-229-9299
NIINs: 002299299, 007990612, 011189963
FSC: 5340 — Hardware, Commercial
CAGE: 1ML14 — BRINKLEY TECHNOLOGY GROUP LLC DBA HERCULES MANUFACTURING (USA)
SPECIFICATIONS
phaseSINGLE
unit_typePLUG-IN
overall_depth25.000 INCHES NOMINAL IN
overall_width16.750 INCHES NOMINAL IN
overall_height9.000 INCHES NOMINAL IN
frequency_rating48.0 HERTZ MINIMUM AND 440.0 HERTZ MAXIMUM OR 48.0 HERTZ MINIMUM AND 66.0 HERTZ MAXIMUM
ac_voltage_rating115.0 VOLTS NOMINAL OR 230.0 VOLTS NOMINAL
plug-in_unit_quantity1
frequency_range_rating+0.020 TO 40.000 MEGAHERTZ
cathode_ray_tube_displayed_informationFREQUENCY ACCURACY,DYNAMIC RANGE,INTERNAL CALIBRATION,SWEPT RESPONSEMEASUREMENTS,NOISE MEASUREMENT,TERMINAL INTERACTION
frequency_calibration_accuracy_range_in_percent+0.0 TO 0.2
NSN5340-00-229-9299
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3585A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.261 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CUP
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HEIGHT: 0.312 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.261 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
HEIGHT0.312 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3585A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3585A?
3585A is a BEARING,BALL,LINEAR MOTION. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 3585A?
3585A is cataloged in the U.S. Government catalog under NSN 5340-00-229-9299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3585A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.