The SEAL,COMPRESSOR INLET is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, screw_material: STEEL COMP 601, fastener_length: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 2835-00-757-2233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT CHAMFER |
| head_height | 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| head_diameter | 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| thread_length | 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN |
| screw_material | STEEL COMP 601 |
| fastener_length | 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN |
| hardness_rating | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| thread_direction | RIGHT-HAND |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.190 INCHES IN |
| screw_surface_treatment | NICKEL AND CADMIUM |
| minimum_tensile_strength | 142000 POUNDS PER SQUARE INCH LBS |
| NSN | 2835-00-757-2233 |
| GENERAL CHARACTERISTICS ITEM DESCRIPTION | OPERATING CONDITIONS: SHAFT SPEED 42,000 RPM,AIR SIDE TEMP MINUS 65 DEG F TO 130 DEG F,OIL SIDE MIL-0-6081 GRADE 1010 DEGF |