PartsTable
Technical Data Sheet
Download PDF

3580273 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3580273: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.406 INCHES NOMINAL ALL HOLES IN, overall_width: 4.125 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.375 INCHES NOMINAL IN, bolt_circle_diameter: 3.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-532-4422, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3580273
NSN: 5330-00-532-4422
NIINs: 005324422, 009238834
FSC: 5330 — Packing and Gasket Materials
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.406 INCHES NOMINAL ALL HOLES IN
overall_width4.125 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.375 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter3.250 INCHES NOMINAL IN
outside_corner_radius0.438 INCHES NOMINAL IN
end_item_identificationLOGISTICS SUPPORT VESSEL
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.125 INCHES NOMINAL IN
NSN5330-00-532-4422
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3580273 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.375 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.125 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.125 INCHES NOMINAL IN
APERTURE DIAMETER1.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER3.250 INCHES NOMINAL IN
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
SUBSTITUTES & CROSS-REFERENCES 1
5H0244Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3580273?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3580273?
3580273 is a GASKET.
What parts can replace 3580273?
There is 1 known substitute for 3580273: 5H0244. Substitute compatibility should be verified for your specific system.
What is the NSN for 3580273?
3580273 is cataloged in the U.S. Government catalog under NSN 5330-00-532-4422. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3580273