PartsTable
Technical Data Sheet
Download PDF

35794 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

35794: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 SADDLE, overall_width: 1.000 INCHES NOMINAL IN, inside_diameter: 3.000 INCHES NOMINAL IN, material_thickness: 0.375 INCHES NOMINAL IN, loop_inside_diameter: 3.000 INCHES NOMINAL IN, end_item_identification: GENERATOR SET,DIESEL ENGINE 6115014620290. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-223-4373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35794
NSN: 5340-01-223-4373
FSC: 5340 — Hardware, Commercial
CAGE: 79260 — WALKER MFG CO (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 SADDLE
overall_width1.000 INCHES NOMINAL IN
inside_diameter3.000 INCHES NOMINAL IN
material_thickness0.375 INCHES NOMINAL IN
loop_inside_diameter3.000 INCHES NOMINAL IN
end_item_identificationGENERATOR SET,DIESEL ENGINE 6115014620290
material_document_and_classificationASTMA575 ASSN STD 2ND MATERIAL RESPONSE AND ASTMA569 ASSN STD 1ST MATERIAL RESPONSE BOLT
surface_treatment_document_and_classificationASTMA366 ASSN STD ALL TREATMENT RESPONSES SADDLE
NSN5340-01-223-4373
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 35794 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTMA366 ASSN STD ALL TREATMENT RESPONSES SADDLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA575 ASSN STD 2ND MATERIAL RESPONSE AND ASTMA569 ASSN STD 1ST MATERIAL RESPONSE BOLT
•
MATERIAL THICKNESS: 0.375 INCHES NOMINAL IN
•
INSIDE DIAMETER: 3.000 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 SADDLE
•
LOOP INSIDE DIAMETER: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTMA366 ASSN STD ALL TREATMENT RESPONSES SADDLE
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA575 ASSN STD 2ND MATERIAL RESPONSE AND ASTMA569 ASSN STD 1ST MATERIAL RESPONSE BOLT
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.375 INCHES NOMINAL IN
INSIDE DIAMETER3.000 INCHES NOMINAL IN
END ITEM IDENTIFICATIONGENERATOR SET,DIESEL ENGINE 6115014620290
MATERIALSTEEL COMP 1010 SADDLE
LOOP INSIDE DIAMETER3.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
4004237Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
96-23618Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 35794?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35794?
35794 is a CLAMP,LOOP.
What parts can replace 35794?
There are 2 known substitutes for 35794: 4004237, 96-23618. Substitute compatibility should be verified for your specific system.
What is the NSN for 35794?
35794 is cataloged in the U.S. Government catalog under NSN 5340-01-223-4373. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35794

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.