PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 357016
357016 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

GEAR SET,WORM AND WORM WHEEL,MAT. Key specifications include special_features: 1983 HORIZON AND OMNI PASSENGER CAR, cross-sectional_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-866-7986, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
357016
NSN: 5330-00-866-7986
FSC: 5330
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
special_features1983 HORIZON AND OMNI PASSENGER CAR
cross-sectional_shape_styleROUND
NSN5330-00-866-7986
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 357016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
•
HOLE DIAMETER: 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 4.160 INCHES MINIMUM AND 4.200 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 3.680 INCHES NOMINAL IN
•
MATERIAL: ASBESTOS OVERALL
•
APERTURE DIAMETER: 3.240 INCHES MINIMUM AND 3.280 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
HOLE DIAMETER0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER4.160 INCHES MINIMUM AND 4.200 INCHES MAXIMUM IN
BOLT CIRCLE DIAMETER3.680 INCHES NOMINAL IN
MATERIALASBESTOS OVERALL
APERTURE DIAMETER3.240 INCHES MINIMUM AND 3.280 INCHES MAXIMUM IN
FSC APPLICATION DATASTARTER,PNEUMATIC,ACFT ENGINE
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
4268768Interchangeable
interchangeable cross-reference
interchangeable
MD-005134Interchangeable
interchangeable cross-reference
interchangeable
14054897Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 357016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 357016?
357016 is a GEAR SET,WORM AND WORM WHEEL,MAT.
What parts can replace 357016?
There are 3 known substitutes for 357016: 4268768, MD-005134, 14054897. Substitute compatibility should be verified for your specific system.
What is the NSN for 357016?
357016 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-866-7986. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 357016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026