PartsTable / COMPONENT / 35660-6
35660-6
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The ROD,THREADED END is a the manufacturer industrial component. Key specifications include width: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, material: STEEL, body_width: 0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM IN, inside_radius: 0.280 INCHES NOMINAL IN, plate_thickness: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN, special_features: COLOR BLACK. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-175-6655, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
35660-6
NSN: 5340-01-175-6655 FSC: 5340 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN material STEEL body_width 0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM IN inside_radius 0.280 INCHES NOMINAL IN plate_thickness 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN special_features COLOR BLACK style_designator STRAIGHT mounting_hole_diameter 0.203 INCHES NOMINAL IN cross-sectional_shape_style HALF ROUND NSN 5340-01-175-6655
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 35660-6
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• PLATE THICKNESS: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
• BODY WIDTH: 0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM IN
• STYLE DESIGNATOR: STRAIGHT
• MOUNTING HOLE DIAMETER: 0.203 INCHES NOMINAL IN
• WIDTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
• INSIDE RADIUS: 0.280 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: HALF ROUND
TECHNICAL CHARACTERISTICS (FLIS)
PLATE THICKNESS 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN BODY WIDTH 0.584 INCHES MINIMUM AND 0.604 INCHES MAXIMUM IN STYLE DESIGNATOR STRAIGHT MOUNTING HOLE DIAMETER 0.203 INCHES NOMINAL IN MATERIAL STEEL WIDTH 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN INSIDE RADIUS 0.280 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE HALF ROUND SPECIAL FEATURES COLOR BLACK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
92657 Interchangeable interchangeable cross-reference
interchangeable
35660-6 Interchangeable interchangeable cross-reference
interchangeable
35660 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 35660-6?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35660-6?
35660-6 is a ROD,THREADED END.
What parts can replace 35660-6?
There are 3 known substitutes for 35660-6: 92657, 35660-6, 35660. Substitute compatibility should be verified for your specific system.
Is 35660-6 still available?
35660-6 is currently cancelled.
Request a Quote — 35660-6