PartsTable
Technical Data Sheet
Download PDF

356519S — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

356519S: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN, hole_diameter: 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM IN, overall_diameter: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-360-8171, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
356519S
NSN: 5310-00-360-8171
FSC: 5310 — Nuts and Washers
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
hole_diameter0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM IN
overall_diameter1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-360-8171
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 356519S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM IN
•
THICKNESS: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.896 INCHES MINIMUM AND 0.916 INCHES MAXIMUM IN
THICKNESS0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
T84G50-1-2AReference document
Same NSN cross-reference
Reference document — Secondary reference
356560SReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 356519S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 356519S?
356519S is a WASHER,FLAT.
What parts can replace 356519S?
There are 2 known substitutes for 356519S: T84G50-1-2A, 356560S. Substitute compatibility should be verified for your specific system.
What is the NSN for 356519S?
356519S is cataloged in the U.S. Government catalog under NSN 5310-00-360-8171. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 356519S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.