PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 356361S7
356361S7 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN, hardness_rating: 42.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM, outside_diameter: 0.560 INCHES NOMINAL IN, material_thickness: 0.010 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-732-4847, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
356361S7
NSN: 5310-00-732-4847
FSC: 5310
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
hardness_rating42.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
outside_diameter0.560 INCHES NOMINAL IN
material_thickness0.010 INCHES NOMINAL IN
NSN5310-00-732-4847
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 356361S7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 0.560 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
HARDNESS RATING: 42.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
•
HOLE DIAMETER: 0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER0.560 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
HARDNESS RATING42.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
A2401Interchangeable
interchangeable cross-reference
interchangeable
664-44Interchangeable
interchangeable cross-reference
interchangeable
S10-44Interchangeable
interchangeable cross-reference
interchangeable
A4260Interchangeable
interchangeable cross-reference
interchangeable
D932PC709Interchangeable
interchangeable cross-reference
interchangeable
A42600F0001618Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 356361S7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 356361S7?
356361S7 is a WASHER,SPRING TENSION.
What parts can replace 356361S7?
There are 18 known substitutes for 356361S7: A2401, 664-44, S10-44 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 356361S7?
356361S7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-732-4847. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 356361S7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026