PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 356314S7
356314S7 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN, outside_diameter: 1.0625 INCHES NOMINAL IN, style_designator: FLAT EXTERNAL AND INTERNAL TEETH, surface_treatment: CADMIUM OR ZINC OVERALL, material_thickness: 0.042 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-017-8571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
356314S7
NSN: 5310-00-017-8571
FSC: 5310
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
outside_diameter1.0625 INCHES NOMINAL IN
style_designatorFLAT EXTERNAL AND INTERNAL TEETH
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.042 INCHES NOMINAL IN
material_document_and_classificationFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
NSN5310-00-017-8571
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 356314S7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL THICKNESS: 0.042 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL AND INTERNAL TEETH
•
HOLE DIAMETER: 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 1.0625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIAL THICKNESS0.042 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORFLAT EXTERNAL AND INTERNAL TEETH
HOLE DIAMETER0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER1.0625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
VX5Interchangeable
interchangeable cross-reference
interchangeable
S1944Interchangeable
interchangeable cross-reference
interchangeable
402228Interchangeable
interchangeable cross-reference
interchangeable
204605Interchangeable
interchangeable cross-reference
interchangeable
138 459Interchangeable
interchangeable cross-reference
interchangeable
402228-60Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 356314S7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 356314S7?
356314S7 is a WASHER,LOCK.
What parts can replace 356314S7?
There are 10 known substitutes for 356314S7: VX5, S1944, 402228 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 356314S7?
356314S7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-017-8571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 356314S7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026